New Technology!
High-Pressure Super Unit
Inverter Controlled Hydraulic Unit
Daikin original High-efficiency IPM motor drive system is integrated with combination control tandem pump to achieve enormous energy-savings and highly sophisticated functions.
Features
- Easy setting of Multi-stage Pressure/Flow control
4 patterns of Pressure/Flow can be set on touch panel and selected with input signal. Shock-less control at the pattern switching is also available. - 50% energy savings (at 20.6 MPa Dead-Head pressure) saving your running cost.
Energy saving system was developed by fusing air-conditioning motor/inverter technology with oil-hydraulic combination control tandem-pump.
Enormous energy-savings can be achieved by adopting a high-efficiency motor even in the general industrial machinery field where the ratio of not only stand-by condition by also actuator operation is high. - Low Noise 60dB(A) (at 20.6 MPa Dead-Head pressure 70 dB(A) or lower even in the full-operation area
Low pulsation and low noise according tandem phase-difference pumps. - Wide production range
15.7 MPa, 40L/min to 20.6 MPa, up to 60 L/min produced in series.
And we flexibly arrange options according to customer requirements.
|
Type
|
SUT06D40L16-10
|
SUT10D40L16-10
|
SUT06D60L21-10
|
SUT10D60L21-10
|
|
|
Max. flow rate (theoretical value) (L/min)
|
41.0
|
61.1
|
|||
|
Max. operated pressure (MPa)
|
15.7
|
20.6
|
|||
|
Tank capacities (L)
|
60
|
100
|
60
|
100
|
|
|
Pressure adjustment range (MPa)
|
1.5~15.7
|
1.5~20.6
|
|||
|
Discharge rate adjustment range (L/min)
|
5.4~41.0
|
8.7~61.1
|
|||
|
Power Supply
|
Motor pump
|
200/200/220V, 50/60/60Hz
|
|||
|
AC fan motor
|
200/200/220V, 50/60/60Hz (supplied from controller)
|
||||
|
External input signal
|
3 points, photo-coupler insulation, DC24V (Max. 27V), 5mA
|
||||
|
External output signal
|
Alarm output
|
2 points, (1C contact), dry contact, contact capacity: DC30V 0.5A (resistance load)
|
|||
|
Warning output
|
1 point each, photo-coupler insulation, open-collector output DC 24V, 30 mA or lower
|
||||
|
Pressure switch output
|
|||||
|
Working Oil
|
Mineral oil based hydraulic oil/wear-resistant hydraulic oil
Viscosity grade:ISO VG32~68 Viscosity range: 15~400 mm2/s (20~200 mm2/s recommended) Degree of contamination: within NAS Class 9 |
||||
|
Tank oil Temperature
|
0~60C (15~50C recommended)
|
||||
|
Ambient temperature
|
0~35C
|
||||
|
Ambient Humidity
|
20~85%RH
|
||||
|
Location
|
Indoors (be sure to fix with bolts, etc.)
|
||||
|
Weight (kg)
|
95
|
110
|
100
|
115
|
|
| Optional Items | Max. output characteristics |
- Selecting four patterns of Pressure/Flow characteristics preset to the controller by input signal from the main machine side can easily achieve multistage pressure/flow rate control.
- Shock-less control is enabled by adjusting the buildup/break time of switching Pressure/Flow characteristics.
- According pump control except conventional valve operation, the system can be simplified and the cost can be reduced for such application high-speed and low-speed of presses, etc. those are switching or multi-stage pressure control is carried out.
