RAS Machine Tool

We Proudly Accept:

Japanese, Taiwanese and Korean Replacement Parts

HK Series Specific for Grinding and Cutting Liquid

Application:

CNC machining center.

Grinding machine.

Cutting machine.

E.D.M. and laser devise.

Features:

Prevent deterioration of liquid.

Open coil type heat exchanger can prevent the obstruction problem of liquid circulating system.

Opening Dimension Of Oil Tank:

Model	A	B	C	D	E	F	G	H	I
HK-400S	370	100	430	250	340	M8	520	450	460
HK-600S	370	100	430	250	340	M8	520	450	460
HK-750S	370	100	500	300	420	M8	560	500	530
HK-1000S	440	100	570	400	470	M10	660	600	600
HK-2RS	440	100	710	480	620	M10	780	680	740
HK-3RS	440	100	780	550	670	M10	840	750	810

Tank containing the opening dimension is no limit in overall dimension and capacity.
1. Please notice on the liquid level. If the liquid level is lower than the cooling coil, the cooling capacity ability will be lower than usual because the coil will produce the moisture from air and mix up with liquid.
2. Please notice the tank and piping connection design, the high temperature liquid should mix up with low temperature before flow into the tank.

Specifications:

Item/Model

HK-400S

HK-600S

HK-750S

HK-1000S

HK-2RS

HK-3RS

Cooling
capacity

KCAL/H
50/60 HZ

1250/1500

1700/2100

2500/3000

3750/4500

5000/6000

7500/9000

W/H
50/60 HZ

1450/1750

1970/2450

2900/3500

4350/5250

5800/7000

8700/10500

BTU/H
50/60 HZ

5000/6000

6700/8300

10000/12000

15000/18000

20000/24000

30000/36000

Temp.
controller

Fixed temperature control type (setting range 10~40C)

Differential temperature control type (tracing room/machine body temperature, setting range -10 ~ +10C)

Use
range

Ambiet
temp.

°C

10 ~ 40

Oil
temp.

°C

10 ~ 45

Power source

3ø 200~220 / 200 ~ 230V 50/60 Hz

3ø 200 ~ 230V 50/60 Hz

Motor W

820

1180

1700

125

2320

125

3690

185

Compressor

Fan

Flow rate of pump
(L/min)

60W 4P

60W 4P× 2

Pressure loss of
oil outlet

Cutting oil,grinding oil,water-soluble liquid,water

Oil viscosity

0.5 ~ 200 Cst

Dimension
W×D×H mm

460×450×720

530×500×720

600×600×820

740×680×840

810×750×920

◎12000BTU=1TON

1. The above cooling capacity is based on ambient temperature 35C, oil temperature 35C.
2. The total height of cooling coil is excluded in dimension of above specification.
3. Please contact with us if special design is requested.
4. Other power voltage is available, please contact with us.
5. Design and specification are subject to change without prior notice